Orders are shipping 3-5 business days following order***FREE SHIP for orders over $75 with code FREESHIP cannot be combined with other codes***Using a code? Free Shipping over $100! *** Free shipping uses carrier of our choice***Sezzle minimum $55***



Blank Sublimatable Journal Burlap

Regular price $11.20

Shipping calculated at checkout.

Sublimatable Burlap has a simple, rustic look and takes sublimation ink beautifully. Available in many popular product designs, it allows full color personalization of products that previously could only be lasered. From picture frames, portfolios, and journals to keychains, passport holders and luggage tags, you now have many more options to offer customers!

Note: The recommended settings above for sublimation may need adjustments for
best results. Sublimation settings will vary depending on the heat press brand
and model ink and paper and atmospheric conditions.

2nd Note: The layers of soft paper towel help to trap ink that is dispersed
outside of the edges of the substrate if there is an overprint area or full
bleed in the artwork.

Supplies needed:
- sublimatable substrate
- sublimation transfer
- teflon or scratch paper
- heat tape (H107)
- soft paper towel (optional)

Heat press settings:
- temperature - 390 degrees F
- dwell time - 1:10 - 1:25 minutes
- pressure - light to medium

Sublimation:
Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. 2-3 layers of soft paper towel (optional)
3. substrate
4. transfer
5. teflon sheet or scratch paper

Steps:
1. Place a strip of heat tape onto the gray fabric next to the sublimatable
panel. This will prevent ink from bleeding onto the fabric.
2. Position the substrate onto the transfer and adhere transfer to substrate
using heat tape.
3. Place the entire transfer and substrate into the press (transfer on top of
substrate).
4. Place the teflon sheet or scratch paper over the transfer.
5. Press the items using the sublimation settings listed above.
6. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
7. Remove transfer from substrate.
8. To prevent warping place the substrate under something heavy while it
cools.


Tips:
- If the image of the final product appears light increase the pressure or
the dwell time slightly (5-15 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed reduce the dwell time slightly (5-15 seconds).