Orders are shipping 3-5 business days following order***FREE SHIP for orders over $75 with code FREESHIP cannot be combined with other codes***Using a code? Free Shipping over $100! *** Free shipping uses carrier of our choice***Sezzle minimum $55***



Counter Culture CCDIY Hard Cast Casting Resin

Regular price $29.95

Shipping calculated at checkout.

Hard Cast is VOC free and specifically developed for casting artists that want an extra hard, durable resin.  Hard Cast can be poured 1-1/2″ to 2″ deep.

Work time varies with your environment but is generally at least 45 minutes or more.

Cures to the touch in 48 hours, complete cure in 7 days.

  • 8 oz Part A & 4 oz Part B, mix 2:1

MINIMUM MIXTURE REQUIREMENTS:

* If you’re new to our brand it’s recommended you mix no less than 2 oz of resin to avoid sticky, soft or uncured resin.  Mixing larger amounts helps ensure your measurements are exact.

Surface Preparation: All areas must be clean, dry and dust free before pouring resin.

Application and Mixing Instructions: For best results work surface and epoxy should be between 75-85°F (24-29°C). Humidity should be under 60%.

Thoroughly mix (2:1) 2 parts of Resin Part A with 1 part Hardener Part B in a clean, dust free container with your preferred stir stick or low speed mixer. Stir for 3-4 minutes, continuously scraping the sides and bottom of the mixing container. To make sure your resin is well mixed, especially if your new to resin, transfer entire contents into a second container and mix for an additional 1-2 minutes. Now you’re ready to pour. After pouring, bubbles may appear. Use a propane torch held 6 inches from the surface and sweep rapidly across entire surface until bubbles disappear. Process may need to be repeated if additional bubbles appear. This will leave a glass-like finish . For best curing results, room temperature should be between 78-85°F (24-29°C). Cures to the touch in 48 hours, complete cure in 7 days.

Emergency and First Aide Procedures: Avoid skin contact. Wear gloves when handling. If skin contact occurs, wash immediately with soap and water. If irritation persists, get medical attention. Eye protection is recommended. If eye contact occurs, flush with large quantities of water. If hardener or mixed resin and hardener is swallowed, do not induce vomiting. Dilute by giving water or milk to drink. If resin only is ingested, induce vomiting. Always get immediate medical attention if swallowed. Keep out of the reach of children.